,

10G Uplink 28-Port L2+ Managed Industrial PoE Switch

Add to wishlist
Compare

L2+ managed industrial PoE fiber switch with 24* 10/100/1000M RJ45 ports and 4*1/10G SFP+ fiber slot ports, Port 1-24 can support IEEE 802.3af/at PoE standard, Built-in 400W power supply. Support 1U/19 inch rack installation.

Model ONV-IPS36028PFM
Interface Characteristics
Fixed Port 24*10/100/1000Base-T PoE ports (Data/Power)

4*1/10G uplink SFP+ fiber slot ports (Data)

1*Console RS232 port (115200,N,8,1)
Ethernet Port Port 1-24 support 10/100/1000Base-T,auto-sensing,Full/half duplex MDI/MDI-X self-adaption
Twisted Pair Transmission 10BASE-T: Cat3,4,5 UTP(≤100 meter)

100BASE-TX: Cat5 or later UTP(≤100 meter)

1000BASE-T: Cat5e or later UTP(≤100 meter)
Optical Fiber Port Gigabit SFP /10G SFP+ optical fiber interface, default matching optical modules (optional order single-mode / multi-mode, single fiber / dual fiber optical module. LC)
Optical Cable/ Distance Multi mode: 850nm / 0 ~ 500M(1.25G), 850nm / 0 ~ 300M (10G);

single mode: 1310nm / 0 ~ 40KM, 1550nm/ 0 ~ 120KM.
Chip Parameter
Network Management Type L2+
Network Protocol IEEE802.3 10BASE-T, IEEE802.3i 10Base-T

IEEE802.3u 100Base-TX , IEEE802.3ab 1000Base-T

IEEE802.3z 1000Base-X

IEEE802.3ae 10GBase-LR/SR

IEEE802.3x
Forwarding Mode Store and Forward(Full Wire Speed)
Switching Capacity 598Gbps (non-blocking)
Forwarding

Rate@64byte

 107.14Mpps
MAC 32K
Buffer Memory 32M
Jumbo Frame 9.6K
LED Indicator Power: PWR (yellow), system:SYS (yellow); network:Link (yellow); PoE: PoE (green); Fiber port : L/A (green)
Reset Switch Yes, support one key to restore factory settings
PoE & Power
PoE Port Port 1 to 24
PoE Management PoE working status

Delay start of power supply

PoE output priority configuration

Scheduling of PoE operation and time

Total power limit of PoE power supply

PoE output power allocation, off& af &at
Power Supply Pin Default: 1/2 (+), 3/6 (-)
Max Power Per Port 30W, IEEE802.3af/at
Total PWR / Input Voltage 400W (AC100-240V)
Power Consumption Standby<25W; Full Load<400W
Power Input Interface Dual input power interface design, AC power supply priority,

support anti-reverse protection, power-off automatic switching DC connection; 2 sets of DC12-48V input interface;

1-way alarm switch interface; 1 set of AC power input interface
Heat Dissipation Low noise fan active cooling
Power Supply Built-in power supply, AC 100~240V 50-60Hz 5A
Physical Parameter
Operation TEMP / Humidity -40~+80°C;5%~90% RH Non condensing
Storage TEMP / Humidity -40~+85°C;5%~95% RH Non condensing
Dimension (L*W*H) 440*300*45mm
Net /Gross Weight <4.4kg / <5.0kg
Installation Desktop type ,19 inch 1U cabinet installation
Certification & Warranty
Lightning protection / protection level Lightning protection: 6KV 8/20us; Protection level: IP30

IEC61000-4-2(ESD):±8kV contact discharge,±15kV air discharge

IEC61000-4-3(RS):10V/m(80~1000MHz)

IEC61000-4-4(EFT): power cable:±4kV; data cable:±2kV

IEC61000-4-5(Surge):power cable:CM±4kV/DM±2kV; data cable:±4kV

IEC61000-4-6(radio frequency transmission):10V(150kHz~80MHz)

IEC61000-4-8(power frequency magnetic field):100A/m;1000A/m ,1s to 3s

IEC61000-4-9(pulsed magnet field):1000A/m

IEC61000-4-10(damped oscillation):30A/m  1MHz

IEC61000-4-12/18(shockwave):CM 2.5kV,DM 1kV

IEC61000-4-16(common-mode transmission):30V; 300V,1s

FCC Part 15/CISPR22(EN55022):Class A

IEC61000-6-2(Common Industrial Standard)
Mechanical Properties IEC60068-2-6 (anti vibration)

IEC60068-2-27 (anti shock)

IEC60068-2-32 (free fall)
Certification CCC;CE mark, commercial; CE/LVD EN60950;FCC Part 15 Class B; RoHS
Warranty 5 years, lifelong maintenance.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “10G Uplink 28-Port L2+ Managed Industrial PoE Switch”

There are no reviews yet.

Related products

Brands Carousel