Ethernet switch
Cisco Catalyst 2960 Series WS-C2960-8TC-S Ethernet Switch
Ethernet switch
Cisco Catalyst 2960 Series WS-C2960-8TC-S Ethernet Switch

0 out of 5
(0)

CISCO Catalyst 2960 Series WS-C2960-8TC-S Ethernet Switch

Model

Brand CISCO

Series Catalyst 2960 Series

Model WS-C2960-8TC-S

Ports & Interface

Primary Ports 8 x RJ45 + 1 x SFP

Primary Port Speed 10/100Mbps + 1000Mbps

Data Transmission

VLAN Support Yes

Jumbo Frames Yes

Details

SNMP Yes

QoS Yes

Dimensions & Weight

Dimensions 1.73″ x 10.6″ x 6.4″

Weight 3.0 lbs.

SKU: n/a

Read more

Add to wishlist

Compare

Ethernet switch

CISCO Catalyst 2960-C WS-C2960CG-8TC-L Managed Compact Switch

Ethernet switch

CISCO Catalyst 2960-C WS-C2960CG-8TC-L Managed Compact Switch

CISCO Catalyst 2960-C WS-C2960CG-8TC-L Managed Compact Switch

Model
Brand	CISCO
Series	Catalyst 2960-C
Model	WS-C2960CG-8TC-L

Format & Standards
Format	External
Network Management Type	Managed

Ports & Interface
Primary Ports	8 x RJ-45 LAN, 2 x RJ-45 Uplink
Primary Port Speed	10/100/1000Mbps

Details
Layer	2

Features
Features	Ports: 1 x Type A USB 1 x Type B USB Management 1 x RJ-45 RS-232 Console Management Memory: Standard Memory: 128 MB Memory Technology: DRAM Flash Memory: 64 MB Operating System: Cisco IOS

Dimensions & Weight
Dimensions	10.6″ x 8.4″ x 1.75″
Weight	3.0 lbs.

Ethernet switch

CISCO Catalyst WS-C2950-24 Switch

Ethernet switch

CISCO Catalyst WS-C2950-24 Switch

CISCO Catalyst WS-C2950-24 Switch

Model
Brand	CISCO
Series	Catalyst
Model	WS-C2950-24

Format & Standards
Standards	IEEE 802.1x support IEEE 802.3x full duplex on 10BASE-T and 100BASE-TX ports IEEE 802.1D Spanning-Tree Protocol IEEE 802.1p class-of-service (CoS) prioritization IEEE 802.1Q VLAN IEEE 802.1s IEEE 802.1w IEEE 802.3 10BASE-T specification IEEE 802.3u 100BASE-TX specification IEEE 802.3ad IEEE 802.3z 1000BASE-X specification

Ports & Interface
Primary Ports	24 x RJ45
Primary Port Speed	10/100Mbps

Data Transmission
MAC Address Table	8K
VLAN Support	Yes

Details
Buffer Memory	8MB
Security	A private VLAN edge provides security and isolation between ports on a switch, ensuring that voice traffic travels directly from its entry point to the aggregation device through a virtual path and cannot be directed to a different port. Support for the 802.1x standard allows users to be authenticated regardless of which LAN ports they are accessing, and it provides unique benefits to customers who have a large base of mobile (wireless) users accessing the network. 802.1x with voice VLAN permits an IP phone access to the voice VLAN regardless of the authorized or unauthorized state of the port. 802.1x with Port Security authenticates the port and manages network access for all MAC addresses, including that of the client. IEEE 802.1x with Guest VLAN allows guests without 802.1x clients to have limited network access on the Guest VLAN. IEEE 802.1x with VLAN assignment allows a dynamic VLAN assignment for a specific user regardless of where the user is connected. SSHv2 provides network security by encrypting administrator traffic during Telnet sessions. SSHv2 requires a special cryptographic software image due to US export restrictions Port Security secures the access to a port based on the MAC address of a user’s device. The aging feature removes the MAC address from the switch after a specific time to allow another device to connect to the same port. MAC Address Notification allows administrators to be notified of new users added or removed from the network. Multilevel security on console access prevents unauthorized users from altering the switch configuration. Trusted Boundary provides the ability to trust the QoS priority settings if an IP phone is present and disable the trust setting in the event that the IP phone is removed, thereby preventing a rogue user from overriding prioritization policies in the network. TACACS+ and RADIUS authentication enables centralized control of the switch and restricts unauthori
Cabling	10BASE-T ports: RJ-45 connectors, two-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling 100BASE-TX ports: RJ-45 connectors; four-pair Category 5 UTP cabling
LEDs	Per-port status LEDs: link integrity, disabled, activity, speed, and full-duplex indications System status LEDs: system, RPS, and bandwidth-utilization indications
Power	Power consumption: 30W (maximum), 102 BTUs per hour AC input voltage: 100 to 127, 200 to 240 VAC (auto-ranging) AC input frequency: 47 to 63 Hz DC input voltages for CISCO RPS 675 and CISCO RPS 300: +12V at 4.5A

Features
Features	Wire-speed, nonblocking performance on all ports, including Gigabit ports 8.8Gbps switching fabric and 6.6 million packets-per-second maximum forwarding rate ensures maximum throughput ven for the most performance-sensitive applications 24 10/100 autosensing ports, each delivering up to 200 Mbps of bandwidth to individual users, servers or workgroups to support bandwidth-intensive applications 8MB shared memory architecture ensures the highest possible throughput with a design that eliminates head-of-line blocking, minimizes packet loss, and delivers better overall performance in environments with extensive multicast and broadcast traffic 16MB of DRAM and 8MB of Flash on-board enable the addition of future feature upgrades, maximizing customer investments Bandwidth aggregation through Fast EtherChannel and Gigabit EtherChannel technology enhances fault tolerance and offers up to 4 Gbps of aggregated bandwidth between switches, to routers and to individual servers 802.1Q standards-based VLAN trunking on each port; 64 VLANs per switch with 64 instances of Spanning Tree (PVST+) Superior multicast management via support for IGMP snooping in hardware

Dimensions & Weight
Dimensions	1.7″ x 17.5″ x 9.5″
Weight	6.5 lbs.

Environmental
Temperature	0ºC to 45ºC (32ºF to 113ºF)
Humidity	10-85% (non-condensing)

Packaging
Package Contents	WS-C2950-24 Quick Start Guide Power Cord Rack mount kit Cable Screws

Disclaimer
Disclaimer	For most updated manufacturer warranty, please go to www.cisco.com.
Registration Phone	1-800-Go-Cisco

Ethernet switch

CISCO WS-C2960-48TT-L 10/100Mbps + 1000Mbps Switch 48 x 10/100Mbps ports 2 x 10/100/1000Mbps uplinks Port 8000 MAC Address Table 64 MB DRAM 32 MB flash memory Buffer Memory

Ethernet switch

CISCO WS-C2960-48TT-L 10/100Mbps + 1000Mbps Switch 48 x 10/100Mbps ports 2 x 10/100/1000Mbps uplinks Port 8000 MAC Address Table 64 MB DRAM 32 MB flash memory Buffer Memory

CISCO WS-C2960-48TT-L 10/100Mbps + 1000Mbps Switch 48 x 10/100Mbps ports 2 x 10/100/1000Mbps uplinks Port 8000 MAC Address Table 64 MB DRAM 32 MB flash memory Buffer Memory

odel
Brand	CISCO
Model	WS-C2960-48TT-L

Format & Standards
Standards	IEEE 802.1s IEEE 802.1w IEEE 802.1x IEEE 802.3ad IEEE 802.3ah (100BASE-X single/multimode fiber only) IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports IEEE 802.1D Spanning Tree Protocol IEEE 802.1p CoS Prioritization IEEE 802.1Q VLAN IEEE 802.3 10BASE-T specification IEEE 802.3u 100BASE-TX specification IEEE 802.3ab 1000BASE-T specification IEEE 802.3z 1000BASE-X specification
Network Management Type	Other

Ports & Interface
Primary Ports	48 x 10/100Mbps ports 2 x 10/100/1000Mbps uplinks Port
Primary Port Speed	10/100Mbps + 1000Mbps

Data Transmission
MAC Address Table	8000
VLAN Support	Yes
Jumbo Frames	Yes

Details
Buffer Memory	64 MB DRAM 32 MB flash memory
Cabling	10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling 100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling 1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling 1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Category 5 UTP cabling 1000BASE-SX, -LX/LH, -ZX, -BX and CWDM SFP-based ports: LC fiber connectors (single/multimode fiber) 100BASE-LX, -BX, -FX: LC fiber connectors (single/multimode fiber).
LEDs	Per-port status: Link integrity, disabled, activity, speed, full-duplex System status: System, RPS, link status, link duplex, link speed
Power	100-240VAC (autoranging) , 1.3-0.8A, 50-60 Hz

Features
Features	Ease of Use and Deployment Superior Redundancy for Fault Backup Integrated CISCO IOS Software Features for Bandwidth Optimization Advanced QoS Granular Rate Limiting Port-based ACLs for Layer 2 interfaces allow application of security policies on individual switch ports. Unicast MAC filtering prevents the forwarding of any type of packet with a matching MAC address. Unknown unicast and multicast port blocking allows tight control by filtering packets that the switch has not already learned how to forward. SSHv2 and SNMPv3 provide network security by encrypting administrator traffic during Telnet and SNMP sessions. SSHv2 and the cryptographic version of SNMPv3 require a special cryptographic software image because of U.S. export restrictions. Bidirectional data support on the Switched Port Analyzer (SPAN) port allows the CISCO Secure intrusion detection system (IDS) to take action when an intruder is detected. TACACS+ and RADIUS authentication enable centralized control of the switch and restrict unauthorized users from altering the configuration. MAC address notification allows administrators to be notified of users added to or removed from the network. DHCP snooping allows administrators to ensure consistent mapping of IP to MAC addresses. This can be used to prevent attacks that attempt to poison the DHCP binding database, and to rate-limit the amount of DHCP traffic that enters a switch port. DHCP Interface Tracker (Option 82) feature augments a host IP address request with the switch port ID. Port security secures the access to an access or trunk port based on MAC address. After a specific timeframe, the aging feature removes the MAC address from the switch to allow another device to connect to the same port.

Dimensions & Weight
Dimensions	17.5″ x 9.3″ x 1.7″
Weight	8.0 lbs.

Environmental
Temperature	32 to 113°F (0 to 45°C)
Humidity	10 to 85% (noncondensing)

Disclaimer
Disclaimer	For most updated manufacturer warranty, please go to www.cisco.com.
Registration Phone	1-800-Go-Cisco

Group
Model	WS-C2960-48TT-L

Ethernet switch

CISCO WS-C2960-8TC-L 10/100Mbps + 1000Mbps Switch 8 Ethernet 10/100 ports and 1 dual-purpose uplink

Ethernet switch

CISCO WS-C2960-8TC-L 10/100Mbps + 1000Mbps Switch 8 Ethernet 10/100 ports and 1 dual-purpose uplink

CISCO WS-C2960-8TC-L 10/100Mbps + 1000Mbps Switch 8 Ethernet 10/100 ports and 1 dual-purpose uplink

Model
Brand	CISCO
Model	WS-C2960-8TC-L

Format & Standards
Standards	IEEE 802.1s IEEE 802.1w IEEE 802.1x IEEE 802.3ad IEEE 802.3ah (100BASE-X single/multimode fiber only) IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports IEEE 802.1D Spanning Tree Protocol IEEE 802.1p CoS Prioritization IEEE 802.1Q VLAN IEEE 802.3 10BASE-T specification IEEE 802.3u 100BASE-TX specification IEEE 802.3ab 1000BASE-T specification IEEE 802.3z 1000BASE-X specification

Ports & Interface
Primary Ports	8 Ethernet 10/100 ports and 1 dual-purpose uplink (dual-purpose uplink port has one 10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port active)
Primary Port Speed	10/100Mbps + 1000Mbps

Data Transmission
MAC Address Table	8000
VLAN Support	Yes
Jumbo Frames	Yes

Details
Buffer Memory	64 MB DRAM 32 MB flash memory
Cabling	10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling 100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling 1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling 1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Category 5 UTP cabling 1000BASE-SX, -LX/LH, -ZX, -BX and CWDM SFP-based ports: LC fiber connectors (single/multimode fiber) 100BASE-LX, -BX, -FX: LC fiber connectors (single/multimode fiber).
LEDs	Per-port status: Link integrity, disabled, activity, speed, full-duplex System status: System, RPS, link status, link duplex, link speed
Power	100-240VAC (autoranging), 0.5-0.25A, 50-60 Hz

Features
Features	Ease of Use and Deployment Superior Redundancy for Fault Backup Integrated CISCO IOS Software Features for Bandwidth Optimization Advanced QoS Granular Rate Limiting Port-based ACLs for Layer 2 interfaces allow application of security policies on individual switch ports. Unicast MAC filtering prevents the forwarding of any type of packet with a matching MAC address. Unknown unicast and multicast port blocking allows tight control by filtering packets that the switch has not already learned how to forward. SSHv2 and SNMPv3 provide network security by encrypting administrator traffic during Telnet and SNMP sessions. SSHv2 and the cryptographic version of SNMPv3 require a special cryptographic software image because of U.S. export restrictions. Bidirectional data support on the Switched Port Analyzer (SPAN) port allows the CISCO Secure intrusion detection system (IDS) to take action when an intruder is detected. TACACS+ and RADIUS authentication enable centralized control of the switch and restrict unauthorized users from altering the configuration. MAC address notification allows administrators to be notified of users added to or removed from the network. DHCP snooping allows administrators to ensure consistent mapping of IP to MAC addresses. This can be used to prevent attacks that attempt to poison the DHCP binding database, and to rate-limit the amount of DHCP traffic that enters a switch port. DHCP Interface Tracker (Option 82) feature augments a host IP address request with the switch port ID. Port security secures the access to an access or trunk port based on MAC address. After a specific timeframe, the aging feature removes the MAC address from the switch to allow another device to connect to the same port.

Dimensions & Weight
Dimensions	10.6″ x 6.4″ x 1.7″
Weight	3.0 lbs.

Environmental
Temperature	32 to 113°F (0 to 45°C)
Humidity	10 to 85% (noncondensing)

Disclaimer
Disclaimer	For most updated manufacturer warranty, please go to www.cisco.com.
Registration Phone	1-800-Go-Cisco

Group
Model	WS-C2960-8TC-L

Showing all 10 results

Acer

Apple

Asus

Dell

Gionee

HP

HTC

IBM

Lenova

LG

Micromax

Microsoft

ONV

Samsung

Sony